Firmware Setup

posted in: Uncategorized | 0

We get questions all the time about setting up printer firmware to support our double extruders, Z-probes and auto bed leveling.  Well, we’ve heard you loud and clear.  Starting today, we are offering customized firmware for all of our extruders … Continued

The Store Is Now Live

posted in: Uncategorized | 0

At long last, the Clough42 store is now live! Until now, the only way to get our products has been through our eBay listings.  Starting today, many of our products are also available directly through our web site.  We accept … Continued

Check out Our Cool Tools

posted in: Uncategorized | 0

We have a lot of conversations about tools.  Partly because people ask questions, and partly because we just love good tools.  We have collected some of our favorites in our new Cool Tools section. We use these tools every day … Continued

Itty Bitty Double Extruder

posted in: Uncategorized | 0

If you’ve been waiting for double-extruder support on your MakerFarm printer, the time has come.  The Itty Bitty Double Extruder is a compact two-material, belt-driven extruder for MakerFarm and other RepRap-derived 3D printers. Features: Silent belt-driven design NEMA 14 motors … Continued

Double Extruder Calibration

posted in: Uncategorized | 0

Calibrating a double extruder can be a real chore.  You have to adjust the nozzles so they’re at exactly the same height, and you have to get your software configured so it knows the offsets between your extruder nozzles. If … Continued