How to Make a Spindle Lock for the Grizzy G0704 Mill: Part 2 – Removing the Top Hats

posted in: Uncategorized | 0

Today, we continue work on the spindle lock for the G0704 mill. Last time, we milled out the clamp parts, down to a waterline. Now we’re going to remove the holding stock (top hat) on the lathe. Or at least mostly on the lathe. Then we’ll take the parts over to the router table for an unorthodox chamfering technique–at least for machinists.

Here are some of the tools used in this video:

*This site contains affiliate links for which I may be compensated