Toolpost Dial Indicator Part 2: Designing the Holder in Fusion 360

posted in: Uncategorized | 0

Today we’re overdesigning a toolpost dial indicator holder in Fusion 360. We’ll use the model of the dial indicator that we created in a previous video as a model and build the holder around it. Once that’s done, we’ll 3D-print a prototype to validate the design before we machine it out of metal.

If you’re following along at home or doing something similar, here are links to the tools used in this video:

*These are affiliate links. When you click one of these links and make a purchase, it helps to support projects like this one.