Description
This kit contains the miscellaneous hardware you will need to assemble your Itty Bitty Double Extruder or Itty Bitty Double FLEX Extruder. Both extruders use the same hardware. The kit includes the screws, nuts, washers, belts, pulleys, bearings and springs all in one convenient kit.
NOTE: This kit contains only the hardware listed below and shown in the photos. You will also need hot ends, stepper motors, hobbed bolts, a servo, a Z probe switch and fans. See the instructions for details.
Kit Contents
- GT2 20-tooth Pulleys with set screws (2)
- GT2 200mm Belts (2)
- 688ZZ 8x16x5mm Bearings (6)
- Extension springs (2)
- Fiberglass/Polyimide insulator
- M2.5×10 socket head cap screws (2)
- M4x.7 hex nuts (2)
- M4x20 button head cap screws (2)
- M3 flat washers (6)
- M3x.5 hex nuts (11)
- M3x25 socket head cap screws (3)
- M3x16 button head socket cap screws (10)
- M3x12 flat head socket cap screws (10)
- M3x8 socket head cap screws (6)
- M3x6 button head socket cap screws (2)
Documentation
Itty Bitty Double Extruder:
Itty Bitty Double Extruder Home Page
Itty Bitty Double FLEX Extruder:
Itty Bitty Double FLEX Extruder Home Page
Itty Bitty Double FLEX V2 Extruder:
Itty Bitty Double FLEX V2 Extruder Home Page
International Buyers
Note to international buyers: We participate in the eBay International Shipping Prgram. If you need shipping outside of the US,
